Zenair float sizes

Zenair Float Sizes


#750		Straight 750S
750S-BPK	Basic Parts Kit	$2,450.00	No Amphib. Model
750S-PDK	Pre-Drilled Kit	$3,990.00	No Amphib. Model
750S-FAF	Assembled Floats N/A*	$6,990.00	No Amphib. Model
1150-FRK	Float Rudder Kit	$350 each float	No Amphib. Model

#950		Straight 950S
950S-BPK	Basic Parts Kit	$2,990.00	No Amphib. Model
950S-PDK	Pre-Drilled Kit	$4,990.00	No Amphib. Model
950S-FAF	Assembled Floats N/A*	$8,450.00	No Amphib. Model
1150/1450-RIG	Rigging / Spreader bars kit**	$1,450.00	No Amphib. Model
1150-FRK	Float Rudder Kit	$350 each float	No Amphib. Model

#1150		Straight 1150S	Amphibious 1150A
1150-BPK	Basic Parts Kit	$3,450.00	$6,450.00
1150-PDK	Pre-Drilled Kit	$5,490.00	$8,990.00
1150-FAF	Assembled Floats N/A*	$8,990.00	$12,990.00
1150/1450-RIG	Rigging / Spreader bars kit**	$1,450.00	$1,450.00
1150-FRK	Float Rudder Kit	$450 each float	$450 each float

#1450		Straight 1450S	Amphibious 1450A
1450-BPK	Basic Parts Kit	$3,990.00	$6,990.00
1450-PDK	Pre-Drilled Kit	$6,999.00	$9,990.00
1450-FAF	Assembled Floats N/A*	$10,990.00	$14,990.00
1150/1450-RIG	Rigging / Spreader bars kit**	$1,450.00	$1,450.00
1450-FRK	Float Rudder Kit	$450 each float	$450 each float

#1700		Straight 1700S
1700-BPK	Basic Parts Kit	$4,990.00	No Amphib. Model
1700-PDK	Pre-Drilled Kit	$9,450.00	No Amphib. Model
1700-FAF	Assembled Floats N/A*	$13,990.00	No Amphib. Model
2200/2500-RIG	Rigging / Spreader bars kit**	$1,800.00	No Amphib. Model
1700-FRK	Float Rudder Kit	$450 each float	No Amphib. Model

#2200		Straight 2200S	Amphibious 2200A
2200-BPK	Basic Parts Kit	$5,990.00	$10,990.00
2200-PDK	Pre-Drilled Kit	$10,450.00	$13,990.00
2200-FAF	Assembled Floats N/A*	$14,990.00	$22,990.00
2200/2500-RIG	Rigging / Spreader bars kit**	$1,800.00	$1,800.00
2200A-RK	Float Rudder Kit	$450 each float	$450 each float

#2500		Straight 2500S	Amphibious 2500A
2500S/A-BPK	Basic Parts Kit	$6,490.00	$11,490.00
2500S/A-PDK	Pre-Drilled Kit	$10,990.00	$14,490.00
2500S/A-FAF	Assembled Floats N/A*	$15,490.00	$23,490.00
2200/2500-RIG	Rigging / Spreader bars kit**	$1,800.00	$1,800.00
2500-RU	Float Rudder Kit	$450 each float	$450 each float

	1220 PARTS PRICE LIST
Part Number	Description	Qty.	Price/unit	Price/set
FLS1220 BL	SHELL w/ T nuts - BLUE	2	$1,600.00	$3,200.00
FLS1220 GR	SHELL w/ T nuts - GREY	2	$1,600.00	$3,200.00
FLS1220 YE	SHELL w/ T nuts - YELLOW	2	$1,600.00	$3,200.00
FL003HC-12	HULL CAP (no drilling or spin welding )*	2	$700.00	$1,400.00
FLB1220-60F	FRONT BLADDER 1220 / 1260	8	$162.00	$1,296.00
FLB1220-1450R	REAR BLADDER 1220 / 1450	8	$124.00	$992.00
FL-SACS-S	SACS BAG - SMALL	4	$145.00	$580.00
FL09	ALU. STIFFENER PLATE - SMALL	2	$275.00	$550.00
FL013	SACS PLATE 1220/1260	2	$45.00	$90.00
FL015	STEP BLOCK - SMALL	4	$12.00	$48.00
*replacement Hull Caps are supplied un-drilled to allow for better on-site custom fitting.

	1260 PARTS PRICE LIST
Part Number	Description	Qty.	Price/unit	Price/set
FLS1260 BL	SHELL w/ T nuts - SHELL w/ T nuts - BLUE	2	$1,650.00	$3,300.00
FLS1260 GR	SHELL w/ T nuts - SHELL w/ T nuts - GREY	2	$1,650.00	$3,300.00
FLS1260 YE	SHELL w/ T nuts - YELLOW	2	$1,650.00	$3,300.00
FL003HC-12	HULL CAP (no drilling or spin welding )*	2	$700.00	$1,400.00
FLB1220-60F	FRONT BLADDER 1220 / 1260	8	$162.00	$1,296.00
FLB1260-1650R	REAR BLADDER 1260 / 1650	8	$130.00	$1,040.00
FL-SACS-S	SACS BAG - SMALL	4	$145.00	$580.00
FL09	ALU. STIFFENER PLATE - SMALL	2	$275.00	$550.00
FL013	SACS PLATE 1220/1260	2	$45.00	$90.00
FL015	STEP BLOCK - SMALL	4	$12.00	$48.00
*replacement Hull Caps are supplied un-drilled to allow for better on-site custom fitting
	1450 PARTS PRICE LIST
Part Number	Description	Qty.	Price/unit	Price/set
FLS1450 BL	SHELL w/ T nuts - BLUE	2	$1,950.00	$3,900.00
FLS1450 GR	SHELL w/ T nuts - GRAY	2	$1,950.00	$3,900.00
FLS1450 YE	SHELL w/ T nuts - YELLOW	2	$1,950.00	$3,900.00
FL004HC-14	HULL CAP (no drilling or spin welding )*	2	$800.00	$1,600.00
FLB-14-16-21-2250F	FRONT BLADDER 1450/1650/2150/2250	8	$184.00	$1,472.00
FLB1220-1450R	REAR BLADDER 1260 /1650	8	$130.00	$1,040.00
FL-SACS-M	SACS BAG - MEDIUM	4	$155.00	$620.00
FL010	ALU. STIFFENER PLATE - MEDIUM	2	$285.00	$570.00
FL013	SACS PLATE 1220/1260	2	$45.00	$90.00
FL016	STEP BLOCK - LARGE	4	$12.00	$48.00
*replacement Hull Caps are supplied un-drilled to allow for better on-site custom fitting

	1650 PARTS PRICE LIST
Part Number	Description	Qty.	Price/unit	Price/set
FLS1650 BL	SHELL w/ T nuts - BLUE	2	$2,450.00	$4,900.00
FLS1650 GR	SHELL w/ T nuts - GRAY	2	$2,450.00	$4,900.00
FLS1650 YE	SHELL w/ T nuts - YELLOW	2	$2,450.00	$4,900.00
FL004HC-16	HULL CAP (no drilling or spin welding )*	2	$800.00	$1,600.00
FLB-14-16-21-2250F	FRONT BLADDER 1450/1650/2150/2250	8	$184.00	$1,472.00
FLB1260-1650R	REAR BLADDER 1260 /1650	8	$130.00	$1,040.00
FL-SACS-L	SACS BAG - LARGE	4	$165.00	$660.00
FL010	ALU. STIFFENER PLATE - MEDIUM	2	$285.00	$570.00
FL013	SACS PLATE 1220/1260	2	$45.00	$90.00
FL016	STEP BLOCK - LARGE	4	$12.00	$48.00
*replacement Hull Caps are supplied un-drilled to allow for better on-site custom fitting

Zenair Floats are given a designation number depending on their size (see LEFT column below). This designation number also corresponds to the flotation of the floats. For example, the #1450 floats are designed for use on aircraft with a MTOW of up to 1,450 pounds. Note that the #1150 amphibious floats are more like 1250 floats and will work well on an aircraft with a MTOW of 1,250 lbs., however, they are too small for an LSA aircraft with a 1,430 pound gross on floats.

Warning: With many aircraft designs, the designer/manufacturer has designated a higher MTOW for float-equipped models than for the original wheeled-version of the aircraft. This is to allow the float-equipped aircraft to retain much of its original useful load, HOWEVER, this will reduce the "G" loading of the aircraft as well as its performance! Before increasing the Gross Weight of a float-equipped aircraft, contact the designer/manufacturer of your aircraft to adequately modify the "G" limits and the performance figures (stall speed & rate of climb) in the Pilot Operating Handbook! Remember to always check the W&B prior to first flight on an aircraft with newly-installed floats...

Also: Floats on an aircraft will greatly increase its utility and fun factor; make sure, however, that when installing floats, you do not inadvertently surpass the maximum allowable gross weight (legal MTOM) for the CAA category that your aircraft is registered in:

                          CATEGORY:                                                    MAX. GROS WEIGHT ALLOWED:
                          Experimental category...................................No Maximum Weight limit in most countries
                          Light Sport category (LSA)............................1,320 lbs + float allowance (110 lbs) = 1430 lbs
                          Advanced Ultralight (Canada)........................1,232 lbs (there is no float allowance for AULA)
                          ULM category (Europe)..................................Different for different countries; check local rules...

FLOAT SIZE	Weight per Float	Length	Max. Width	Basic Parts Kit (BPK)	Pre-drilled Parts Kit (PDK)
#1150 Straight	55 lbs	12.5 ft	21 inches	Available	Available
#1150 Amphibious	90 lbs	12.5 ft	24 inches	Available	Available
#1450 Straight	60 lbs	15.5 ft	24 inches	Available	Available
#1450 Amphibious	100 lbs	15.5 ft	24 inches	Available	Available
#2200 Straight	60 lbs	15.5 ft	27 inches	Available	Available
#2200 Amphibious	100 lbs	15.5 ft	27 inches	Available	Available
#2500 Straight	95 lbs	17.5 ft	30 inches	Available	Available
#2500 Straight Amphibious	110 lbs	17.5 ft	32.5 inches	Available	Available
Value	160lbs	17.5 ft	32.5 inches	Available	Available
Value	115 lbs	17.5 ft	34 inches	Available	Available

Note: ZENAIR floats are designed to be primarily assembled with sealed blind rivets and marine adhesive in order to facilitate assembly, to keep costs down and to simplify maintenance. On larger float sizes, the bottom keel extrusions are nevertheless solid-riveted to maximize strength. Kits are supplied with all rivets required for assembly. Customers who prefer classic solid-rivet construction throughout may certainly assemble their floats with solid-rivets (use quantities listed on the packing-lists to order your own rivets). The standard hydraulic system (to retract wheels in amphibious models) includes an electric pump that can be mounted anywhere in the fuselage; a manual hand pump (that must be mounted close to the pilot) is also available. Price for the manual or electric pump is the same.

Float weights are approximate and includes the wheels/brakes in amphibious models. Weight does not include Rigging / Spreader bars kit or hydraulic pump, paint and/or other optional equipment. For fuselage mounting hardware, contact the airframe manufacturer.
All information is subject to change without notice and figures are approximates only.

NOTICE: If you are considering Zenair Floats for a Type-Certificated aircraft (NOT EXPERIMENTAL), please read the Q&A.