750# Zenair Floats for Ultralights
Available as straight floats only. These are the smallest and lightest available.
Special features:
- Lightweight and very strong.
- 6061-T6 aluminum.
- Fiberglass tips.
- Extruded aluminum keel.
- Top stiffener / walkway.
- Easy to install spreader bar system to top of floats. See drawing on this page.
- Use of a 3M Marine Adhesive Sealer for sealing the floats and for added strength.
- Option of using a special sealed pull rivet or standard solid rivet. Using the pull rivets will speed up the building process by more than 50%. In the factory assembled floats, pulled rivets are used.
- Available as a parts kit, as a pre-drilled kit or factory assembled.
Special features:
- Lightweight and very strong.
- 6061-T6 aluminum.
- Fiberglass tips.
- Extruded aluminum keel.
- Top stiffener / walkway.
- Easy to install spreader bar system to top of floats. See drawing on this page.
- Use of a 3M Marine Adhesive Sealer for sealing the floats and for added strength.
- Option of using a special sealed pull rivet or standard solid rivet. Using the pull rivets will speed up the building process by more than 50%. In the factory assembled floats, pulled rivets are used.
- Available as a parts kit, as a pre-drilled kit or factory assembled.
| Zenair Floats | Weight per Float | Length | Max Width | Parts Kit | Pre-Drilled Kit | Factory Built |
| 750# Straight | 35 lbs | 12.5 feet | 21" | Yes | Yes | Yes |
Above shows typical installation of the attachment brackets for the spreader bars. The attachment brackets as shown above are included in the kit. For finished floats, the brackets are included but not installed.
Weight does not include Rigging / Spreader bars kit, paint or other optional equipment.
All information is approximate and subject to change without notice.
All information is approximate and subject to change without notice.
